Decorative Outdoor Lighting

Futura (DCA)

Futura (DCA)
Get a QuoteRequest a quote online View Catalog

Anchor Bolts

Anchor bolts conform to ASTM F1554 Grade-55 standards. Bolts have an “L” bend at one end and a minimum of 12” galvanized threads on the other end. Each bolt comes fashioned with two flat washers and two hexagonal nuts.

Base

Each pole assembly is fashioned with a Millerbernd Manufacturing Company Chamfered High Base. The base is fabricated from the same material as the pole shaft and stands 27 inches tall. The pole shaft is slip fitted and welded to the base.

Shaft

The pole shaft conforms to ASTM A1011 Grade 50 carbon steel standards and is formed with a constant linear taper. The shaft is fabricated with a uniform chamfer across all four corners.

Handhole

A reinforced handhole with cover, grounding lug, and hardware is provided with each pole assembly.

Mounting Options

The pole is be specified with a single tenon mount for pole top mounting or side drilled pattern. For multiple fixtures, an adapter should be used. A removable pole cap shall be provided for poles specified with side drill luminaire mounting.

Finish Options

Carbon steel poles are to be specified as hot-dip galvanized per ASTM A123 or finish painted with our standard Millerbond Wet Coat Finish.

Hardware

All hardware and fasteners are supplied with each pole assembly. All structural fasteners are galvanized high-strength carbon steel.

Tap to expand details below

  • Anchor Bolts

    Anchor Bolts

    Anchor bolts conform to ASTM F1554 Grade-55 standards. Bolts have an “L” bend at one end and a minimum of 12” galvanized threads on the other end. Each bolt comes fashioned with two flat washers and two hexagonal nuts.

  • Base

    Base

    Each pole assembly is fashioned with a Millerbernd Manufacturing Company Chamfered High Base. The base is fabricated from the same material as the pole shaft and stands 27 inches tall. The pole shaft is slip fitted and welded to the base.

  • Shaft

    Shaft

    The pole shaft conforms to ASTM A1011 Grade 50 carbon steel standards and is formed with a constant linear taper. The shaft is fabricated with a uniform chamfer across all four corners.

  • Handhole

    Handhole

    A reinforced handhole with cover, grounding lug, and hardware is provided with each pole assembly.

  • Mounting Options

    Mounting Options

    The pole is be specified with a single tenon mount for pole top mounting or side drilled pattern. For multiple fixtures, an adapter should be used. A removable pole cap shall be provided for poles specified with side drill luminaire mounting.

  • Finish Options

    Finish Options

    Carbon steel poles are to be specified as hot-dip galvanized per ASTM A123 or finish painted with our standard Millerbond Wet Coat Finish.

  • Hardware

    Hardware

    All hardware and fasteners are supplied with each pole assembly. All structural fasteners are galvanized high-strength carbon steel.

Get a QuoteRequest a quote online View Catalog

Options & Detail

  • Cross Section
    Chamfered Square
  • Pole Top Detail
    Pole Top Detail
  • Base Detail
    Base Detail

Specifications

Use horizontal scroll bar at bottom of each table to view all columns

Swipe to view all columns

Carbon Steel

PART # MOUNTING
HEIGHT
(FT)		 WEIGHT
(LBS.)		 BASE
DIAMETER
(IN)		 TOP
DIAMETER
(IN)		 BOLT
CIRCLE
(IN)		 BASE
SQUARE
(IN)		 MAX EPA
90 MPH		 MAX EPA
100 MPH		 MAX EPA
110 MPH		 MAX EPA
120 MPH		 MAX EPA
130 MPH		 MAX EPA
140 MPH		 MAX EPA
150 MPH
DCA-A-081-250 25 196 8.1 3.7 11 12 17.24 12.94 9.71 7.22 5.72 3.72 2.46
DCA-A-081-300 30 232 8.1 3.7 11 12 12.02 8.42 5.72 3.64 2.01 0.7
DCA-A-089-350 35 272 8.9 3.7 12 14 9.36 5.91 3.32 1.32
DCA-A-097-400 40 350 9.7 3.7 15 15 6.23 2.83
  1. Variations from above sizes are available. Consult factory for allowable weight and EPA ratings for custom sizes.
  2. Charted weights include the base and pole shaft.