LIghting Pole Accessories
Anchor bolts conform to ASTM A325 standards. Bolts come fashioned with one hexagonal nut and two flat washers. Anchor bolts shall be hot-dip galvanized per ASTM A153.
The base plate is fabricated from ASTM A36 carbon steel. The base is fabricated with slotted bolt holes to allow for a varying bolt circle size. The base plate is welded to the base shaft on the top and bottom.
See table for pipe size and material.
The base shall be fabricated with two 2.5” x 12” slots spaced 1800 apart to allow for wireway access. Wireways shall be aligned with the location notch cut into the base plate.
Screw-in anchor bases shall be hot-dip galvanized per ASTM A153.
Screw-in anchor bases are to be installed using a standard digger derrick with a conventional Kelly bar.
Tap to expand details below
Use horizontal scroll bar at bottom of each table to view all columns
Swipe to view all columns
|SB46||95||48||12||1.25||0.875||2.625||6.625||SCH. 20||9.5 x 10.5||10,000|
|SB66||125||60||12||1.5||1.125||4.25||6.625||SCH. 40||9.5 x 10.5||10,000|
|SB68||163||60||16||2.125||1.125||4.125||8.625||SCH. 20||11 x 17||15,000|
|SB88||207||84||16||2.125||1.125||4.25||8.625||SCH. 20||11 x 17||15,000|
* Consult facory for maximum allowable pole size and EPA.