Decorative Outdoor Lighting

Contemporary (DNA)

Anchor Bolts

Anchor bolts conform to ASTM F1554 Grade-55 standards. Bolts have an “L” bend at one end and a minimum of 12” galvanized threads on the other end. Each bolt comes fashioned with two flat washers and two hexagonal nuts.

Base

The base plate is fabricated from ASTM A36 carbon steel or ASTM A240 stainless steel plate. The base is fabricated with slotted bolt holes to allow for a +/- 0.5” variance in listed nominal bolt circle size. The base plate telescopes the pole shaft and is circumferentially welded top and bottom.

Shaft

Round pole shafts conform to ASTM A500 Grade B standards for carbon steel tube. Octagonal and 16-sided shafts conform to ASTM A1011 Grade 50 carbon steel or ASTM A240 Grade 201L stainless steel standards.

Handhole

A reinforced handhole with cover, grounding lug, and hardware is provided with each pole assembly.

Mounting Options

The pole is be specified with a single tenon mount for pole top mounting or side drilled pattern. For multiple
fixtures, an adapter should be used. A removable pole cap shall be provided for poles specified with side drill
luminaire mounting.

Finish Options

Carbon steel poles are to be specified as hot-dip galvanized per ASTM A123 or finish painted with our standard Millerbond Wet Coat Finish. Stainless steel poles are to be specified as frost (rust resistant stainless steel shot blast) finished or finish painted with our standard Millerbond Wet Coat Finish.

Hardware

All hardware and fasteners shall be supplied with each pole assembly. All structural fasteners shall be galvanized high-strength carbon steel or 18-8 stainless steel.

Tap to expand details below

  • Anchor Bolts

    Anchor Bolts

    Anchor bolts conform to ASTM F1554 Grade-55 standards. Bolts have an “L” bend at one end and a minimum of 12” galvanized threads on the other end. Each bolt comes fashioned with two flat washers and two hexagonal nuts.

  • Base

    Base

    The base plate is fabricated from ASTM A36 carbon steel or ASTM A240 stainless steel plate. The base is fabricated with slotted bolt holes to allow for a +/- 0.5” variance in listed nominal bolt circle size. The base plate telescopes the pole shaft and is circumferentially welded top and bottom.

  • Shaft

    Shaft

    Round pole shafts conform to ASTM A500 Grade B standards for carbon steel tube. Octagonal and 16-sided shafts conform to ASTM A1011 Grade 50 carbon steel or ASTM A240 Grade 201L stainless steel standards.

  • Handhole

    Handhole

    A reinforced handhole with cover, grounding lug, and hardware is provided with each pole assembly.

  • Mounting Options

    Mounting Options

    The pole is be specified with a single tenon mount for pole top mounting or side drilled pattern. For multiple
    fixtures, an adapter should be used. A removable pole cap shall be provided for poles specified with side drill
    luminaire mounting.

  • Finish Options

    Finish Options

    Carbon steel poles are to be specified as hot-dip galvanized per ASTM A123 or finish painted with our standard Millerbond Wet Coat Finish. Stainless steel poles are to be specified as frost (rust resistant stainless steel shot blast) finished or finish painted with our standard Millerbond Wet Coat Finish.

  • Hardware

    Hardware

    All hardware and fasteners shall be supplied with each pole assembly. All structural fasteners shall be galvanized high-strength carbon steel or 18-8 stainless steel.

Options & Detail

  • Cross Section Options
    Cross Section: Round, Octagonal, 16-Sided
  • Pole Top Detail
    Pole Top Detail
  • Base Detail
    Base Detail

Specifications

Use horizontal scroll bar at bottom of each table to view all columns

Swipe to view all columns

Carbon Steel

PART # MOUNTING
HEIGHT
(FT)
WEIGHT
(LBS.)
BASE O.D.
(IN)
BOLT CIRCLE
+/- 0.5
(IN)
BASE
SQUARE
(IN)
MAX EPA
90 MPH
MAX EPA
100 MPH
MAX EPA
110 MPH
MAX EPA
120 MPH
MAX EPA
130 MPH
MAX EPA
140 MPH
MAX EPA
150 MPH
DNA-A-030-100 10 51 3 8 8 9.91 7.83 6.29 5.1 4.17 3.43 2.84
DNA-A-040-100 10 62 4 8 8 18.59 14.82 12.01 9.9 8.38 7.17 6.2
DNA-A-030-120 12 58 3 8 8 7.91 6.16 4.85 3.85 3.06 2.44 1.93
DNA-A-040-120 12 72 4 8 8 15.11 11.92 9.54 7.78 6.55 5.58 4.79
DNA-A-030-140 14 66 3 8 8 6.36 4.85 3.72 2.86 2.18 1.64 1.2
DNA-A-040-140 14 82 4 8 8 12.45 9.69 7.63 6.13 5.12 4.33 3.69
DNA-A-030-160 16 73 3 8 8 5.06 3.75 2.76 2.01 1.42 0.95 0.57
DNA-A-040-160 16 92 4 8 8 10.2 7.8 6.01 4.72 3.9 3.26 2.75
DNA-A-030-180 18 80 3 8 8 3.94 2.79 1.94 1.28 0.76
DNA-A-040-180 18 102 4 8 8 8.27 6.18 4.61 3.5 2.85 2.34 1.94
DNA-A-040-200 20 88 3 8 8 3 1.99 1.23 0.65
DNA-A-040-200 20 112 4 8 8 6.68 4.82 3.44 2.48 1.96 1.56 1.25
DNA-A-050-200 20 135 5 8 8 11.69 9.07 7.31 5.99 4.97 4.17 3.53
DNA-A-040-250 25 137 4 8 8 3.62 2.19 1.12
DNA-A-050-250 25 166 5 8 8 7.11 5.24 4.09 3.23 2.58 2.07 1.68
DNA-A-050-300 30 198 5 8 8 3.77 2.42 1.7 1.17 0.79

Stainless Steel

PART # MOUNTING
HEIGHT
(FT)
WEIGHT
(LBS.)
BASE O.D.
(IN)
BOLT CIRCLE
+/- 0.5
(IN)
BASE
SQUARE
(IN)
MAX EPA
90 MPH
MAX EPA
100 MPH
MAX EPA
110 MPH
MAX EPA
120 MPH
MAX EPA
130 MPH
MAX EPA
140 MPH
MAX EPA
150 MPH
DNA-E-060-200 20 91 6 9 9 9.31 6.65 4.66 3.13 1.94 0.99
DNA-E-065-200 20 101 6.5 9.5 9.5 10.9 7.86 5.59 3.85 2.49 1.41 0.53
DNA-E-060-250 25 101 6 9 9 4.9 2.84 1.3
DNA-E-070-250 25 126 7 9.5 9.5 6.78 4.16 2.22 0.73
DNA-E-070-300 30 134 7 9.5 9.5 2.72 0.6
DNA-E-080-300 30 166 8 10.5 10.5 3.53 1.03
DNA-F-080-300 30 231 8 10.5 10.5 14.27 9.78 6.42 3.86 1.85
DNA-E-080-350 35 175 8 10.5 10.5 3.12 1.32
DNA-E-085-350 35 195 8.5 11.5 11.5 4.21 2.21 0.89
DNA-F-085-350 35 273 8.5 11.5 11.5 14.44 10.64 7.98 5.59 3.6 2.01 0.72
DNA-E-090-400 40 232 9 12.5 12.5 1.75
DNA-F-090-400 40 327 9 12.5 12.5 11.34 7.9 5.3 2.9 1.03
DNA-F-100-450 45 403 10 13.5 13.5 10.31 4.8 1.84
DNA-F-100-500 50 422 10 13.5 13.5 6.11 2.99
  1. Variations from above sizes are available. Consult factory for allowable weight and EPA ratings for custom sizes.
  2. Charted weights include the base and pole shaft.
  3. Stainless steel non tapered poles are only offered with octagonal or 16-sided cross sections.
  4. All multi-sided stainless steel poles with a mounting height of 35 feet or more are 16-sided.