Decorative Outdoor Lighting

Euro (DES)

Euro (DES)
Get a QuoteRequest a quote online View Catalog

Anchor Bolts

Anchor bolts conform to ASTM F1554 Grade-55 standards. Bolts have an “L” bend at one end and a minimum of 12” galvanized threads on the other end. Each bolt is fashioned with two flat washers and two hexagonal nuts.

Base Style

The base plate is fabricated from ASTM A36 carbon steel or ASTM A240 stainless steel plate. The base is fabricated with slotted bolt holes to allow for a +/- 0.5” variance in listed nominal bolt circle size. The base plate telescopes the pole shaft and is circumferentially welded top and bottom.

Shaft

The pole shaft conforms to ASTM A1011 Grade 50 carbon steel or ASTM A240 Grade 201L stainless steel standards and is formed with a constant linear taper.

Handhole

A reinforced doorway with cover, grounding lug, and hardware is provided with each pole assembly.

Arm

Euro arms are fabricated from 2.5” (2.88” O.D.) schedule 40 pipe which is circumferentially welded to a central hub. The Euro arm is slip fitted 8” over the pole top and is held in place by a clamp and two tubular support braces. The Euro arm has a rise of 3 feet and 4 inches above the pole top and is fitted with a 2” (2.38” O.D.) x 8” slipfitter for luminaire attachment.

Finish Options

Carbon steel poles are to be specified as hot-dip galvanized per ASTM A123 or finish painted with our standard Millerbond Wet Coat Finish. Stainless steel poles are to be specified as finish painted with our standard Millerbond Wet Coat Finish. Round stainless steel poles must be finish painted with our standard Millerbond Wet Coat Finish.

Hardware

All hardware and fasteners are supplied with each pole assembly. All structural fasteners are galvanized high-strength carbon steel or 18-8 stainless steel.

Tap to expand details below

  • Anchor Bolts

    Anchor Bolts

    Anchor bolts conform to ASTM F1554 Grade-55 standards. Bolts have an “L” bend at one end and a minimum of 12” galvanized threads on the other end. Each bolt is fashioned with two flat washers and two hexagonal nuts.

  • Base Style

    Base Style

    The base plate is fabricated from ASTM A36 carbon steel or ASTM A240 stainless steel plate. The base is fabricated with slotted bolt holes to allow for a +/- 0.5” variance in listed nominal bolt circle size. The base plate telescopes the pole shaft and is circumferentially welded top and bottom.

  • Shaft

    Shaft

    The pole shaft conforms to ASTM A1011 Grade 50 carbon steel or ASTM A240 Grade 201L stainless steel standards and is formed with a constant linear taper.

  • Handhole

    Handhole

    A reinforced doorway with cover, grounding lug, and hardware is provided with each pole assembly.

  • Arm

    Arm

    Euro arms are fabricated from 2.5” (2.88” O.D.) schedule 40 pipe which is circumferentially welded to a central hub. The Euro arm is slip fitted 8” over the pole top and is held in place by a clamp and two tubular support braces. The Euro arm has a rise of 3 feet and 4 inches above the pole top and is fitted with a 2” (2.38” O.D.) x 8” slipfitter for luminaire attachment.

  • Finish Options

    Finish Options

    Carbon steel poles are to be specified as hot-dip galvanized per ASTM A123 or finish painted with our standard Millerbond Wet Coat Finish. Stainless steel poles are to be specified as finish painted with our standard Millerbond Wet Coat Finish. Round stainless steel poles must be finish painted with our standard Millerbond Wet Coat Finish.

  • Hardware

    Hardware

    All hardware and fasteners are supplied with each pole assembly. All structural fasteners are galvanized high-strength carbon steel or 18-8 stainless steel.

Get a QuoteRequest a quote online View Catalog

Options & Detail

  • Cross Section Options
    Cross Section: Round, Octagonal, 16-Sided
  • Base Detail
    Base Detail

Specifications

Use horizontal scroll bar at bottom of each table to view all columns

Swipe to view all columns

Carbon Steel

PART # MOUNTING
HEIGHT
(FT)		 MAX ARM
LENGTH
(FT)		 WEIGHT
(LBS.)		 BASE O.D.
(IN)		 TOP O.D.
(IN)		 BOLT CIRCLE
+/- 0.5
(IN)		 BASE
SQUARE
(IN)		 MAX EPA
90 MPH		 MAX EPA
100 MPH		 MAX EPA
110 MPH		 MAX EPA
120 MPH		 MAX EPA
130 MPH		 MAX EPA
140 MPH		 MAX EPA
150 MPH
DES-081-A-078-200 20 8 222 7.8 5.2 12 12 5.85 5.2 4.56 3.96 3.42 2.94 2.52
DES-081-A-085-250 25 8 270 8.5 5.2 12 12 5.71 5.04 4.4 3.8 3.26 2.79 2.39
DES-081-A-096-300 30 8 335 9.6 5.6 13 13 5.6 4.92 4.26 3.67 3.14 2.68 2.28
DES-081-A-103-350 35 8 400 10.3 5.6 14 14 5.5 4.81 4.15 3.56 3.04 2.58 2.19
DES-081-A-110-400 40 8 462 11 5.6 14 14 5.41 4.71 4.06 3.47 2.95 2.5 2.11

Stainless Steel

PART # MOUNTING
HEIGHT
(FT)		 MAX ARM
LENGTH
(FT)		 WEIGHT
(LBS.)		 BASE O.D.
(IN)		 TOP O.D.
(IN)		 BOLT CIRCLE
+/- 0.5
(IN)		 BASE
SQUARE
(IN)		 MAX EPA
90 MPH		 MAX EPA
100 MPH		 MAX EPA
110 MPH		 MAX EPA
120 MPH		 MAX EPA
130 MPH		 MAX EPA
140 MPH		 MAX EPA
150 MPH
DES-081-E-078-200 20 8 162 7.8 5.2 12 12 3.2 2.79 2.4 2.04 1.71 1.42 1.16
DES-081-E-085-250 25 8 136 8.5 5.2 12 12 3.11 2.7 2.3 1.94 1.61 1.33 1.08
DES-081-E-096-300 30 8 176 9.6 5.6 13 13 3.04 2.62 2.22 1.86 1.54 1.26 1.02
DES-081-E-103-350 35 8 272 10.3 5.6 14 14 2.98 2.55 2.16 1.79 1.48 1.2 0.96
DES-081-E-110-400 40 8 308 11 5.6 14 14 2.92 2.5 2.1 1.74 1.42 1.15 0.8
  1. Variations from above sizes are available. Consult factory for allowable weight and EPA ratings for custom sizes.
  2. Charted weights include the base, pole shaft, and luminaire mounting arm.
  3. All multi-sided stainless steel poles with a mounting height of 35 feet or more are 16-sided.
  4. Stainless steel structures with a round cross section must be finish painted with our Millerbond wet coat finish.