Street & Area Lighting
ACT (Chamfered Square Tapered)
Anchor bolts conform to ASTM F1554 Grade-55 standards. Bolts have an “L” bend at one end and a minimum of 12” galvanized threads on the other end. Two galvanized flat washers per ASTM F436 and two galvanized hexagonal nuts per ASTM A563 Grade DH are provided with each bolt.
Each pole assembly is fashioned with a Millerbernd Manufacturing Company Chamfered High Base. The base shall be fabricated from the same material as the pole shaft and stands 27 inches tall. The pole shaft is slip fitted and welded to the base.
The pole shaft conforms to ASTM A1011 Grade 50 (carbon steel) standards and is formed with a constant linear taper. The shaft is formed with a uniform chamfer across all four corners.
A reinforced handhole with flush mounted cover, grounding lug, and hardware is provided with each pole assembly.
The pole may be specified with a single tenon mount for pole top mounting or side drilled pattern. For multiple fixtures, an adapter should be used. A removable pole cap is provided for poles specified with side drill luminaire mounting.
Carbon steel poles may be specified as hot-dip galvanized per ASTM A123 and/or finish painted with our standard Millerbond Wet Coat Finish.
All hardware and fasteners are supplied with each pole assembly. All structural fasteners are galvanized high-strength carbon steel.
Tap to expand details below