SD1 (Davit) Stainless Steel

Street & Area Lighting

Get a QuoteRequest a quote online View Catalog

Anchor Bolts

Anchor bolts conform to ASTM F1554 Grade-55 standards. Bolts have an “L” bend at one end and a minimum of 12” galvanized threads on the other end. Two galvanized flat washers per ASTM F436 and two galvanized hexagonal nuts per ASTM A563 Grade DH are provided with each bolt.

Anchor Base

The base plate is fabricated from ASTM A240 stainless steel. The base is fabricated with slotted bolt holes to allow for a +/- 0.5” variance in listed nominal bolt circle size. The base plate telescopes the pole shaft and is circumferentially welded top and bottom.

High Base

Each pole assembly is fashioned with a Millerbernd Manufacturing Company High Base. The base is fabricated from the same material as the pole shaft and stands 27 inches tall. The pole shaft is slip fitted and welded to the base.

Direct-Embedded Base

Each pole assembly is fashioned with a direct embedded base. The base extends below the ground line and is fitted with a 1 inch coupling located 2’ below the ground line for wire entrance. The direct embedded base is fashioned with an anti-rotation bearing strap on the bottom of the base.

Shaft

The pole shaft conforms to ASTM A240 Grade 201LN stainless steel standards.

Handhole

A reinforced handhole with cover, grounding lug, and hardware is provided with each pole assembly. Pole assemblies fabricated with a High-Base are provided with a flush mounted handhole with cover, grounding lug, and hardware.

Arms

Single arm SD1 poles are fabricated of a single piece construction with an integral curved arm and a minimum of a one foot horizontal on the tangent of the curve. A two piece (shaft and arm) construction is used when twin arms are specified. Arms are fitted with a 2.38” diameter pipe adapter with 3 degrees nominal rise from the roadway. SD1 style arms measure 3, 6, 8, 9, or 12 feet in length from the center of the pole shaft.

Finishing

Stainless steel poles may be specified as frost (rust resistant stainless steel shot blast)
finished or finish painted with our standard Millerbond Wet Coat Finish.

Hardware

All hardware and fasteners are supplied with each pole assembly. All structural fasteners are 18-8 stainless steel.

Tap to expand details below

Anchor Bolts

Anchor Bolts

Anchor bolts conform to ASTM F1554 Grade-55 standards. Bolts have an “L” bend at one end and a minimum of 12” galvanized threads on the other end. Two galvanized flat washers per ASTM F436 and two galvanized hexagonal nuts per ASTM A563 Grade DH are provided with each bolt.
Anchor Base

Anchor Base

The base plate is fabricated from ASTM A240 stainless steel. The base is fabricated with slotted bolt holes to allow for a +/- 0.5” variance in listed nominal bolt circle size. The base plate telescopes the pole shaft and is circumferentially welded top and bottom.
High Base

High Base

Each pole assembly is fashioned with a Millerbernd Manufacturing Company High Base. The base is fabricated from the same material as the pole shaft and stands 27 inches tall. The pole shaft is slip fitted and welded to the base.
Direct-Embedded Base

Direct-Embedded Base

Each pole assembly is fashioned with a direct embedded base. The base extends below the ground line and is fitted with a 1 inch coupling located 2’ below the ground line for wire entrance. The direct embedded base is fashioned with an anti-rotation bearing strap on the bottom of the base.
Shaft

Shaft

The pole shaft conforms to ASTM A240 Grade 201LN stainless steel standards.
Handhole

Handhole

A reinforced handhole with cover, grounding lug, and hardware is provided with each pole assembly. Pole assemblies fabricated with a High-Base are provided with a flush mounted handhole with cover, grounding lug, and hardware.
Arms

Arms

Single arm SD1 poles are fabricated of a single piece construction with an integral curved arm and a minimum of a one foot horizontal on the tangent of the curve. A two piece (shaft and arm) construction is used when twin arms are specified. Arms are fitted with a 2.38” diameter pipe adapter with 3 degrees nominal rise from the roadway. SD1 style arms measure 3, 6, 8, 9, or 12 feet in length from the center of the pole shaft.
Finishing

Finishing

Stainless steel poles may be specified as frost (rust resistant stainless steel shot blast)
finished or finish painted with our standard Millerbond Wet Coat Finish.
Hardware

Hardware

All hardware and fasteners are supplied with each pole assembly. All structural fasteners are 18-8 stainless steel.

Get a QuoteRequest a quote online View Catalog

Options & Detail
Specifications

Options & Detail

Cross Section Options
Twin Arm Arrangement
Arm End Detail

Base Options

Specifications

Use horizontal scroll bar at bottom of each table to view all columns

Swipe to view all columns

Anchor Base

PART #	MOUNTING HEIGHT (FT)	MAX ARM LENGTH (FT)	WEIGHT (LBS.)	BASE O.D. (IN)	TOP O.D. (IN)	BOLT CIRCLE +/- 0.5 (IN)	BASE SQUARE (IN)	MAX EPA 90 MPH	MAX EPA 100 MPH	MAX EPA 110 MPH	MAX EPA 120 MPH	MAX EPA 130 MPH	MAX EPA 140 MPH	MAX EPA 150 MPH
SD1-121-A-069-E-250	25	12	159	6.9	4	10	10	7.11	4.96	3.28	1.95	0.89
SD1-121-A-076-E-300	30	12	192	7.6	4	10.5	10.5	5.68	3.63	2.06	0.84
SD1-121-A-084-E-350	35	12	232	8.4	4	11.5	11.5	4.4	2.47	1.02
SD1-121-A-084-F-350	35	12	280	8.4	4	11.5	11.5	9.1	9.1	7.53	5.44	3.78	2.42	1.29
SD1-121-A-094-E-400	40	12	300	9.4	4	12.5	12.5	4.25	2.31	0.86
SD1-121-A-094-F-400	40	12	398	9.4	4	12.5	12.5	8.63	8.63	7.48	5.36	3.66	2.28	1.13
SD1-121-A-105-E-500	50	12	365	10.5	4	13.5	13.5	1.88
SD1-121-A-105-F-500	50	12	458	10.5	4	13.5	13.5	6.78	6.58	4.5	2.83	1.48

Direct-Embedded Base

PART #	MOUNTING HEIGHT (FT)	MAX ARM LENGTH (FT)	WEIGHT (LBS.)	BASE O.D. (IN)	TOP O.D. (IN)	BURIAL DEPTH (FT)	MAX EPA 90 MPH	MAX EPA 100 MPH	MAX EPA 110 MPH	MAX EPA 120 MPH	MAX EPA 130 MPH	MAX EPA 140 MPH	MAX EPA 150 MPH
SD1-121-D-069-E-250	25	12	120	6.9	4	5	7.11	4.96	3.28	1.95	0.89
SD1-121-D-076-E-300	30	12	148	7.6	4	6	5.68	3.63	2.06	0.84
SD1-121-D-084-E-350	35	12	179	8.4	4	6	4.4	2.47	1.02
SD1-121-D-084-F-350	35	12	302	8.4	4	6	9.1	9.1	7.53	5.44	3.78	2.42	1.29
SD1-121-D-094-E-400	40	12	312	9.4	4	7	4.25	2.31	0.86
SD1-121-D-094-F-400	40	12	410	9.4	4	7	8.63	8.63	7.48	5.36	3.66	2.28	1.13
SD1-121-D-105-E-500	50	12	371	10.5	4	8	1.88
SD1-121-D-105-F-500	50	12	475	10.5	4	8	6.78	6.58	4.5	2.83	1.48

High-Base

PART #	MOUNTING HEIGHT (FT)	MAX ARM LENGTH (FT)	WEIGHT (LBS.)	BASE O.D. (IN)	TOP O.D. (IN)	BOLT CIRCLE (IN)	BASE SQUARE (IN)	MAX EPA 90 MPH	MAX EPA 100 MPH	MAX EPA 110 MPH	MAX EPA 120 MPH	MAX EPA 130 MPH	MAX EPA 140 MPH	MAX EPA 150 MPH
SD1-121-H-067-E-250	25	12	140	6.7	3.26	15	15	6.26	4.33	2.82	1.63	0.67
SD1-121-H-081-E-300	30	12	178	8.1	3.26	15	15	6.19	4.11	2.49	1.21
SD1-121-H-094-E-350	35	12	201	9.4	3.11	15	15	6.39	4.07	2.17	0.68
SD1-121-H-094-F-350	35	12	305	9.4	3.11	15	15	10.55	10.55	10.55	8.99	6.91	5.25	3.89
SD1-121-H-094-E-400	40	12	312	9.4	3.11	15	15	4.11	1.86
SD1-121-H-094-F-400	40	12	406	9.4	3.11	15	15	10.09	9.65	6.75	4.55	2.82	1.43
SD1-121-H-105-E-500	50	12	373	10.5	3.11	17	17	1.19
SD1-121-H-105-F-500	50	12	467	10.5	3.11	17	17	7.86	6.31	3.73	1.78

Variations from above sizes are available. Consult factory for allowable weight and EPA ratings for custom sizes.
Charts are for single arm confi gurations only. Consult factory for allowable weight and EPA ratings on twin arm arrangements.
Charted weights include the base, pole shaft, and luminaire mounting arm.
All multi-sided stainless steel poles with a mounting height of 35 feet or more are 16-sided.
Stainless steel structures with a round cross section must be fi nish painted with our Millerbond wet coat fi nish.
Stainless steel break-away High-Base option available. For a break-away High-Base, insert “BKB” as an option.
The “Base O.D.” measurement for direct-embedded structures is taken at the ground line.

Street & Area Lighting