Street & Area Lighting

SD2 (Davit) Stainless Steel

SD2 (Davit)
Get a QuoteRequest a quote online View Catalog

Anchor Bolts

Anchor bolts conform to ASTM F1554 Grade-55 standards. Bolts have an “L” bend at one end and a minimum of 12” galvanized threads on the other end. Two galvanized flat washers per ASTM F436 and two galvanized hexagonal nuts per ASTM A563 Grade DH are provided with each bolt.

Anchor Base

The base plate is fabricated from ASTM A240 stainless steel. The base is fabricated with slotted bolt holes to allow for a +/- 0.5” variance in listed nominal bolt circle size. The base plate telescopes the pole shaft and is circumferentially welded top and bottom.

High Base

Each pole assembly is fashioned with a Millerbernd Manufacturing Company High Base. The base is fabricated from the same material as the pole shaft and stands 27 inches tall. The pole shaft is slip fitted and welded to the base.

Direct-Embedded Base

Each pole assembly is fashioned with a direct embedded base. The base extends below the ground line and is fitted with a 1 inch coupling located 2’ below the ground line for wire entrance. The direct embedded base is fashioned with an anti-rotation bearing strap on the bottom of the base.

Shaft

The pole shaft conforms to ASTM A240 Grade 201LN stainless steel standards.

Handhole

A reinforced handhole with cover, grounding lug, and hardware is provided with each pole assembly. Pole assemblies fabricated with a High-Base are provided with a flush mounted handhole with cover, grounding lug, and hardware.

Arms

SD2 style arms are fabricated from 14 gauge ASTM A240 Grade 201LN stainless steel. SD2 arms are fitted with a 2.38” x 6” pipe adapter with 3 degrees nominal rise from the roadway for luminaire mounting. Arms are slip fitted onto the pole assembly and secured in place by set screws.

Finishing

Stainless steel poles may be specified as frost (rust resistant stainless steel shot blast) finished or finish painted with our standard Millerbond Wet Coat Finish.

Hardware

All hardware and fasteners are supplied with each pole assembly. All structural fasteners are 18-8 stainless steel.

Tap to expand details below

  • Anchor Bolts

    Anchor Bolts

    Anchor bolts conform to ASTM F1554 Grade-55 standards. Bolts have an “L” bend at one end and a minimum of 12” galvanized threads on the other end. Two galvanized flat washers per ASTM F436 and two galvanized hexagonal nuts per ASTM A563 Grade DH are provided with each bolt.

  • Anchor Base

    Anchor Base

    The base plate is fabricated from ASTM A240 stainless steel. The base is fabricated with slotted bolt holes to allow for a +/- 0.5” variance in listed nominal bolt circle size. The base plate telescopes the pole shaft and is circumferentially welded top and bottom.

  • High Base

    High Base

    Each pole assembly is fashioned with a Millerbernd Manufacturing Company High Base. The base is fabricated from the same material as the pole shaft and stands 27 inches tall. The pole shaft is slip fitted and welded to the base.

  • Direct-Embedded Base

    Direct-Embedded Base

    Each pole assembly is fashioned with a direct embedded base. The base extends below the ground line and is fitted with a 1 inch coupling located 2’ below the ground line for wire entrance. The direct embedded base is fashioned with an anti-rotation bearing strap on the bottom of the base.

  • Shaft

    Shaft

    The pole shaft conforms to ASTM A240 Grade 201LN stainless steel standards.

  • Handhole

    Handhole

    A reinforced handhole with cover, grounding lug, and hardware is provided with each pole assembly. Pole assemblies fabricated with a High-Base are provided with a flush mounted handhole with cover, grounding lug, and hardware.

  • Arms

    Arms

    SD2 style arms are fabricated from 14 gauge ASTM A240 Grade 201LN stainless steel. SD2 arms are fitted with a 2.38” x 6” pipe adapter with 3 degrees nominal rise from the roadway for luminaire mounting. Arms are slip fitted onto the pole assembly and secured in place by set screws.

  • Finishing

    Finishing

    Stainless steel poles may be specified as frost (rust resistant stainless steel shot blast) finished or finish painted with our standard Millerbond Wet Coat Finish.

  • Hardware

    Hardware

    All hardware and fasteners are supplied with each pole assembly. All structural fasteners are 18-8 stainless steel.

Get a QuoteRequest a quote online View Catalog

Options & Detail

  • Cross Section Options
    Cross Section: Round, Octagonal, 16-Sided
  • Twin Arm Arrangement
    Twin Arm Arrangement
  • Arm attachment Detail
    Arm Attachment Detail
Base Options
  • Anchor Base (A)
  • High Base (H)
  • Direct-Embed (D) - Ground Line

Specifications

Use horizontal scroll bar at bottom of each table to view all columns

Swipe to view all columns

Anchor Base

PART # MOUNTING
HEIGHT
(FT)		 MAX ARM
LENGTH
(FT)		 WEIGHT
(LBS.)		 BASE O.D.
(IN)		 TOP O.D.
(IN)		 BOLT CIRCLE
+/- 0.5
(IN)		 BASE
SQUARE
(IN)		 MAX EPA
90 MPH		 MAX EPA
100 MPH		 MAX EPA
110 MPH		 MAX EPA
120 MPH		 MAX EPA
130 MPH		 MAX EPA
140 MPH		 MAX EPA
150 MPH
SE1-101-A-069-E-250 25 10 131 6.9 4 10 10 3.58 3.58 3.58 2.91 2 1.27 0.67
SE1-101-A-076-E-300 30 10 160 7.6 4 10.5 10.5 3.25 3.25 2.88 1.83 1.02
SE1-101-A-084-E-350 35 10 194 8.4 4 11.5 11.5 3.03 3.03 1.84 0.9
SE1-101-A-084-F-350 35 10 269 8.4 4 11.5 11.5 4.8 4.8 4.8 4.8 4.8 3.69 2.69
SE1-101-A-094-E-400 40 10 287 9.4 4 12.5 12.5 3.03 2.77 1.43
SE1-101-A-094-F-400 40 10 388 9.4 4 12.5 12.5 4.81 4.81 4.81 4.81 4.54 3.3 2.29
SE1-101-A-105-E-500 50 10 322 10.5 4 13.5 13.5 2.01
SE1-101-A-105-F-500 50 10 440 10.5 4 13.5 13.5 4.3 4.3 4.3 3.23 2.03 1.04

Direct-Embedded Base

PART # MOUNTING
HEIGHT
(FT)		 MAX ARM
LENGTH
(FT)		 WEIGHT
(LBS.)		 BASE O.D.
(IN)		 TOP O.D.
(IN)		 BURIAL
DEPTH
(FT)		 MAX EPA
90 MPH		 MAX EPA
100 MPH		 MAX EPA
110 MPH		 MAX EPA
120 MPH		 MAX EPA
130 MPH		 MAX EPA
140 MPH		 MAX EPA
150 MPH
SE1-101-D-069-E-250 25 10 118 6.9 4 5 3.58 3.58 3.58 2.91 2 1.27 0.67
SE1-101-D-076-E-300 30 10 147 7.6 4 6 3.25 3.25 2.88 1.83 1.02
SE1-101-D-084-E-350 35 10 177 8.4 4 6 3.03 3.03 1.84 0.9
SE1-101-D-084-F-350 35 10 252 8.4 4 6 4.8 4.8 4.8 4.8 4.8 3.69 2.69
SE1-101-D-094-E-400 40 10 272 9.4 4 7 3.03 2.77 1.43
SE1-101-D-094-F-400 40 10 371 9.4 4 7 4.81 4.81 4.81 4.81 4.54 3.3 2.29
SE1-101-D-105-E-500 50 10 307 10.5 4 8 2.01
SE1-101-D-105-F-500 50 10 423 10.5 4 8 4.3 4.3 4.3 3.23 2.03 1.04

High-Base

PART # MOUNTING
HEIGHT
(FT)		 MAX ARM
LENGTH
(FT)		 WEIGHT
(LBS.)		 BASE O.D.
(IN)		 TOP O.D.
(IN)		 BOLT CIRCLE
(IN)		 BASE
SQUARE
(IN)		 MAX EPA
90 MPH		 MAX EPA
100 MPH		 MAX EPA
110 MPH		 MAX EPA
120 MPH		 MAX EPA
130 MPH		 MAX EPA
140 MPH		 MAX EPA
150 MPH
SE1-101-H-067-E-250 25 10 121 6.7 3.26 15 15 2.12 2.12 2.12 1.82 0.88
SE1-101-H-081-E-300 30 10 154 8.1 3.26 15 15 2.2 2.2 2.2 1.48
SE1-101-H-094-E-350 35 10 199 9.4 3.11 15 15 2.2 2.2 2.2 2.2 1.08
SE1-101-H-094-F-350 35 10 284 9.4 3.11 15 15 3.55 3.55 3.55 3.55 3.55 3.55 3.55
SE1-101-H-094-E-400 40 10 304 9.4 3.11 15 15 1.86 1.86 1.86 1.25
SE1-101-H-094-F-400 40 10 396 9.4 3.11 15 15 3.06 3.06 3.06 3.06 3.06 3.06 2.86
SE1-101-H-105-E-500 50 10 338 10.5 3.11 17 17 1.58 1.5
SE1-101-H-105-F-500 50 10 452 10.5 3.11 17 17 2.65 2.65 2.65 2.65 2.65 1.79 0.93
  1. Variations from above sizes are available. Consult factory for allowable weight and EPA ratings for custom sizes.
  2. Charts are for single arm configurations only. Consult factory for allowable weight and EPA ratings on twin arm arrangements.
  3. Charted weights include the base, pole shaft, and luminaire mounting arm.
  4. All multi-sided stainless steel poles with a mounting height of 35 feet or more are 16-sided.
  5. Stainless steel structures with a round cross section must be finish painted with our Millerbond wet coat finish.
  6. Stainless steel break-away High-Base option available. For a break-away High-Base, insert “BKB” as an option.
  7. The “Base O.D.” measurement for direct-embedded structures is taken at the ground line.