Street & Area Lighting

SJ1 (Tapered Arm) Carbon Steel

SJ1 (Tapered Arm)
Get a QuoteRequest a quote online View Catalog

Anchor Bolts

Anchor bolts conform to ASTM F1554 Grade-55 standards. Bolts have an “L” bend at one end and a minimum of 12” galvanized threads on the other end. Each bolt comes fashioned with two galvanized flat washers per ASTM F436 and two galvanized hexagonal nuts per ASTM A563 Grade DH.

Anchor Base

The base plate is fabricated from ASTM A36 carbon steel plate. The base is fabricated with slotted bolt holes to allow for a +/- 0.5” variance in listed nominal bolt circle size. The base plate telescopes the pole shaft and is circumferentially welded top and bottom.

High Base

Each pole assembly is fashioned with a Millerbernd Manufacturing Company High Base. The base is fabricated from the same material as the pole shaft and stands 27 inches tall. The pole shaft is slip fitted and welded to the base.

Direct-Embedded Base

Each pole assembly is fashioned with a direct embedded base. The base extends below the ground line and is fitted with a 1 inch coupling located 2’ below the ground line for wire entrance.

Shaft

The pole shaft conforms to ASTM A240 Grade 201L stainless steel standards.

Handhole

A reinforced handhole with cover, grounding lug, and hardware is provided with each pole assembly.

Arms

SJ1 arms are formed from 14 gauge ASTM A240 Grade 201L stainless steel. Each SJ1 arm attaches to the pole shaft with a three bolt simplex plate. Each SJ1 arm has a rise of 3 feet and 3 inches from the pole top and is fitted with a 2.38” diameter pipe adapter.

Finishing

Stainless steel poles are to be specified as frost (rust resistant stainless steel shot blast) finished or finish painted with our standard Millerbond Wet Coat Finish.

Hardware

All hardware and fasteners are supplied with each pole assembly. All structural fasteners are 18-8 stainless steel.

Tap to expand details below

  • Anchor Bolts

    Anchor Bolts

    Anchor bolts conform to ASTM F1554 Grade-55 standards. Bolts have an “L” bend at one end and a minimum of 12” galvanized threads on the other end. Each bolt comes fashioned with two galvanized flat washers per ASTM F436 and two galvanized hexagonal nuts per ASTM A563 Grade DH.

  • Anchor Base

    Anchor Base

    The base plate is fabricated from ASTM A36 carbon steel plate. The base is fabricated with slotted bolt holes to allow for a +/- 0.5” variance in listed nominal bolt circle size. The base plate telescopes the pole shaft and is circumferentially welded top and bottom.

  • High Base

    High Base

    Each pole assembly is fashioned with a Millerbernd Manufacturing Company High Base. The base is fabricated from the same material as the pole shaft and stands 27 inches tall. The pole shaft is slip fitted and welded to the base.

  • Direct-Embedded Base

    Direct-Embedded Base

    Each pole assembly is fashioned with a direct embedded base. The base extends below the ground line and is fitted with a 1 inch coupling located 2’ below the ground line for wire entrance.

  • Shaft

    Shaft

    The pole shaft conforms to ASTM A240 Grade 201L stainless steel standards.

  • Handhole

    Handhole

    A reinforced handhole with cover, grounding lug, and hardware is provided with each pole assembly.

  • Arms

    Arms

    SJ1 arms are formed from 14 gauge ASTM A240 Grade 201L stainless steel. Each SJ1 arm attaches to the pole shaft with a three bolt simplex plate. Each SJ1 arm has a rise of 3 feet and 3 inches from the pole top and is fitted with a 2.38” diameter pipe adapter.

  • Finishing

    Finishing

    Stainless steel poles are to be specified as frost (rust resistant stainless steel shot blast) finished or finish painted with our standard Millerbond Wet Coat Finish.

  • Hardware

    Hardware

    All hardware and fasteners are supplied with each pole assembly. All structural fasteners are 18-8 stainless steel.

Get a QuoteRequest a quote online View Catalog

Options & Detail

  • Cross Section Options
    Cross Section: Round, Octagonal, 16-Sided
  • Twin Arm Arrangement
    Twin Arm Arrangement
  • Arm Attachment Detail
    Arm Attachment Detail
Base Options
  • Anchor Base (A)
  • High Base (H)
  • Direct-Embed (D) - Ground Line

Specifications

Use horizontal scroll bar at bottom of each table to view all columns

Swipe to view all columns

Anchor Base

PART # MOUNTING
HEIGHT
(FT)		 MAX ARM
LENGTH
(FT)		 WEIGHT
(LBS.)		 BASE O.D.
(IN)		 TOP O.D.
(IN)		 BOLT CIRCLE
+/- 0.5
(IN)		 BASE
SQUARE
(IN)		 MAX EPA
90 MPH		 MAX EPA
100 MPH		 MAX EPA
110 MPH		 MAX EPA
120 MPH		 MAX EPA
130 MPH		 MAX EPA
140 MPH		 MAX EPA
150 MPH
SJ1-171-A-060-A-200 20 17 206 6 3.62 9 9 1.95 1.95 1.95 1.95 1.95 1.95 1.95
SJ1-171-A-070-A-250 25 17 254 7 3.92 10 10 2.27 2.27 2.27 2.27 2.27 2.27 2.01
SJ1-171-A-080-A-300 30 17 313 8 4.22 11 11 2.68 2.68 2.66 2.68 2.68 2.38 1.39
SJ1-171-A-080-A-350 35 17 343 8 3.52 11 11 1.04 1.04 1.04 1.04 1.04 0.61
SJ1-171-A-085-A-350 35 17 369 8.5 4.02 11.5 11.5 2 2 2 2 2 1.94 0.8
SJ1-171-A-090-A-400 40 17 423 9 3.82 12.5 12.5 1.48 1.48 1.48 1.48 1.48 0.82
SJ1-171-A-105-A-500 50 17 558 10.5 3.45 14 14 1.49 1.49 1.49 0.51

Direct-Embedded Base

PART # MOUNTING
HEIGHT
(FT)		 MAX ARM
LENGTH
(FT)		 WEIGHT
(LBS.)		 BASE O.D.
(IN)		 TOP O.D.
(IN)		 BURIAL
DEPTH
(FT)		 MAX EPA
90 MPH		 MAX EPA
100 MPH		 MAX EPA
110 MPH		 MAX EPA
120 MPH		 MAX EPA
130 MPH		 MAX EPA
140 MPH		 MAX EPA
150 MPH
SJ1-171-D-060-A-200 20 17 158 6 3.62 5 1.95 1.95 1.95 1.95 1.95 1.95 1.95
SJ1-171-D-070-A-250 25 17 206 7 2.92 5 2.27 2.27 2.27 2.27 2.27 2.27 2.01
SJ1-171-D-080-A-300 30 17 263 8 2.72 6 2.68 2.68 2.68 2.68 2.68 2.38 1.39
SJ1-171-D-080-A-350 35 17 287 8 2.52 6 1.04 1.04 1.04 1.04 1.04 0.61
SJ1-171-D-085-A-350 35 17 307 8.5 4.02 6 2 2 2 2 2 1.94 0.8
SJ1-171-D-090-A-400 40 17 354 9 3.82 7 1.48 1.48 1.48 1.48 1.48 0.82
SJ1-171-D-105-A-500 50 17 489 10.5 3.45 8 1.49 1.49 1.49 0.51

High-Base

PART # MOUNTING
HEIGHT
(FT)		 MAX ARM
LENGTH
(FT)		 WEIGHT
(LBS.)		 BASE O.D.
(IN)		 TOP O.D.
(IN)		 BOLT CIRCLE
(IN)		 BASE
SQUARE
(IN)		 MAX EPA
90 MPH		 MAX EPA
100 MPH		 MAX EPA
110 MPH		 MAX EPA
120 MPH		 MAX EPA
130 MPH		 MAX EPA
140 MPH		 MAX EPA
150 MPH
SJ1-171-H-070-A-200 20 17 226 7 4 15 15 3.57 3.57 3.57 3.57 3.57 3.57 2.58
SJ1-171-H-070-A-250 25 17 252 7 4 15 15 2.25 2.25 2.25 2.25 2.25 1.47
SJ1-171-H-086-A-300 30 17 330 8.6 4 15 15 2.45 2.45 2.45 2.45 2.45 2.13 0.73
SJ1-171-H-096-A-350 35 17 357 9.6 4 15 15 2.29 2.29 2.29 2.29 2.29 1.2
SJ1-171-H-096-A-400 40 17 429 9.6 4 15 15 1.73 1.73 1.73 1.73
SJ1-171-H-106-A-500 50 17 562 10.6 4 15 15 1.64 1.64 1.64
  1. Variations from above sizes are available. Consult factory for allowable weight and EPA ratings for custom sizes.
  2. Charts are for single arm configurations only. Consult factory for allowable weight and EPA ratings on twin arm arrangements.
  3. Charted weights include the base, pole shaft, and luminaire mounting arm.
  4. The “Base O.D.” measurement for direct-embedded structures is taken at the ground line.